Sanihealth Nighthawk Black Latex Powder Free Gloves

• Colour: Midnight Black
• Quantity: 100 gloves per box
• Material: Latex, powder-free, non-sterile
• High haptic sensation
• Balanced strength, comfort & flexibility 
• Micro finger textured
• Midnight black absorbs hi-intensity overhead lighting and minimizes reflection

We continuously strive to distribute top quality products which support and enhance the Tattoo Industry. Our products speak to a new generation of people and artists alike, who are passionate about their tattoos and protecting them.

OINTMENT: INK-EEZE Pink Tattoo Ointment is a NON-Petroleum based ointment infused with essential oils. The formula was specifically developed by tattooers and skin care specialists for use as a lubricant during the tattoo process and collectors to use as an aftercare. A little goes a long way.

DIRECTIONS: STORE IN A COOL, DRY PLACE. FOR THE ARTIST - Apply as needed during the tattoo application. FOR AFTERCARE - Apply thin coats as needed during the recovery period.

WARNINGS: Keep out of reach of children. Avoid contact with eyes. In case of accidental contact with eyes rinse with cold water.

INGREDIENTS: Carthamus tinctorius (Safflower) Seed Oil, Beeswax, Synthetic Beeswax, Fragrance, Calophyllum Inophllum Seed Oil, Tamanu, Royal Jelly Extract, Propandiol, Propolis Wax, Red 7

Trident 24kt Gold PVD Titanium Threadless Prong Set Crystal Attachment

Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

Trident Titanium Internal Ball 1.2mm x 3mm Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Titanium Internal Lab Cluster 1.2mm (Attachment Only)

Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Trident Titanium Internally Threaded Opal Ball

Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

****Expired Sterile Date****

Disposable Soft Rubber Grips Diamond

Box Qty; 25pcs

Trident 24KT Gold PVD Titanium Prong Set Mini Navel

1.6mm x 10mm - 4mm x 6mm Stones

Internally Threaded Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the titanium surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.

PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint).

PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).

As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.  

Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.

Short Expiry Date 09/23

Silverback XXX Black 4oz

• All purpose black.
• Use for lining, shading or solid fill.
• Goes into the skin as easily as it wipes off.
• Processed in a sterile facility.
• Tested and certified for the EU.
• Packaged with a 100% tamper evident seal in the EU.
• Made in USA.
• By a tattooer for tattooers!!

Titanium Internal Cluster 4 Crystals (Attachment Only)

Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Titanium Internal Lab Cluster 1.2mm (Attachment Only) 3/4mm

Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Trident Internally Threaded Disk Attachment 0.9mm (For 16G)

Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Trident 24kt Gold PVD Titanium Forward Facing Jewelled Hinged Ring

Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the titanium surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.

PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint).

PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).

As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.  

Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.

Trident 24kt Gold PVD Titanium Internally Threaded Claw Set Attachment 0.9mm Thread

Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the titanium surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.

PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint).

PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).

As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.  

Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.

World Famous

Michele Turco 6 Bottle Portrait Set 1 oz is manufactured by the team at World Famous Ink which have been producing ink for over 50 years. The tattoo portrait set is perfect for those hard to find skin tones

Michele Portrait White
Michele Lightskin Tone (not sold individually)
Michele Medium Skin Tone 1 (not sold individually)
Michele Medium Skin Tone 2 (not sold individually)
Michele Dark Skin Tone (not sold individually)
Michele Deep Brown (not sold individually)

Surface Disinfecting Wipe - Hospital Grade

Proven to kill at least 99.9% of germs including MRSA and VRE – Hospital Grade Surface Disinfecting Wipes are one of the most effective products on the market

This revolutionary formula contains a mix of different biocides, each with a different mechanism of action, reducing the risk of germs developing resistance

Ideal for use on hard, non-pourous surfaces and equipment made of stainless steel, plastic, formica and glass.

Trident Titanium Internally Threaded Mini Prong Set Navel

1.6mm x 10mm

Internally Threaded Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Trident Internally Threaded Sword Attachment 0.9mm (For 16G)

Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)