FK Irons





FK Irons Spektra Flux Wireless Stealth
FK Irons Spektra Flux Wireless Stealth
We listened to you and created a revolutionary device that puts, you, the tattoo artist in control of your art. The first truly wireless tattoo machine is here – the Spektra Flux. More power without the complex stuff. Just a user-friendly device with all the features you need.
We have created a Bluetooth enabled wireless machine with up to 10 hours of battery life and a complete fast charging speed of about 1.5 hours. Charge your tattoo machine from any USB-C port including your car, laptop, or battery pack. Know where you stand at all times and check your battery life and your voltage through an LED indicator. To not over complicate things, we created a user-friendly interface with only 3 buttons so you can spend more time in your art. Prioritizing your comfort and safety with a lightweight, ergonomic design that packs most of the weight in the center, reducing the strain in your hand.
It’s time to unleash your power, embrace the wireless revolution and create your masterpiece. Say bye, bye to your annoying cables, rotary, coil machine! Even if you’re loyal to the coil, you’ll love the Flux.
- 4 mm Direct Drive: a versatile stroke for lining and color packing
- Lightweight Design: Only 6.3 ounces (178 grams), most of the weight is in the center
- Dynamic Power Path Management: Always get the same amount of power
- LED Indicator: From here you can check your battery life, navigate modes, and change voltage
- Changing Voltage: Decrease and Increase voltage by half increments
- Detachable battery: Switch to the auxiliary Powerbolt battery.
- Battery life: Up to 10 hours. Can charge as quickly as 2 hours when used with a proper voltage USB-C power source and USB-C cord. Note: Longer power cords and weaker power sources will result on the unit taking a long time to charge or not charging at all.
- USB-C port: Charge your wireless tattoo machine in your car, laptop, or from a battery pack
- Bluetooth capability: Pair with Darklab app and connect with different devices
- Darklab App : Change voltage through voice, access tattoo time and receive firmware updates
- Wireless footswitch capable (coming soon)
- Compatible with most membrane needles
- Voltage : 5-12 Volts
- Grip: 33MM
- Handcrafted in the USA
*Please note: With any issues or faults as per FK Irons Instructions please contact them directly before contacting American Body Art, as they will be best in helping with any issues. Link below:

Flux PowerBolt FK Irons
PowerBolt Tattoo Battery Supply
Unleash your power! If you love the Spektra Flux, you know the PowerBolt is the brain and power supply of the machine. The detachable PowerBolt battery supply provides an extra peace of mind. Two is better than one–especially for those artists that are on the road or want a backup for when the battery is running low. Attaching and detaching the PowerBolt is easy with just a quick quarter-turn. Simply recharge as needed. Just plug into a USB-C cable, the same you use for an iPad or smartphone.
The PowerBolt provides the ultimate peace of mind in backup for busy artists. Are you ready to flex your Flux?
- Battery supply for the Flux wireless tattoo machine
- Detach and attach effortlessly with 1/4 turn
- Battery life: Up to 10 hours. Can charge as quickly as 2 hours when used with a proper voltage USB-C power source and USB-C cord. Note: Longer power cords and weaker power sources will result on the unit taking a long time to charge or not charging at all.
- USB-C port: Charge your PowerBolt from any standard USB-C cord. This is perfect for the traveling artist or for trade shows
- LED Indicator : Easily check your operating voltage and battery life
- Changing Voltage: Simply decrease and increase voltage by half increments via two buttons
- Darklab App : Change voltage through voice, access tattoo time and receive firmware updates
- Manufactured in the USA
*Please note: With any issues or faults as per FK Irons Instructions please contact them directly before contacting American Body Art, as they will be best in helping with any issues. Link below:





FK Irons Spektra Flux Wireless Chromium
FK Irons Spektra Flux Wireless Tattoo Machine
We listened to you and created a revolutionary device that puts, you, the tattoo artist in control of your art. The first truly wireless tattoo machine is here – the Spektra Flux. More power without the complex stuff. Just a user-friendly device with all the features you need.
We have created a Bluetooth enabled wireless machine with up to 10 hours of battery life and a complete fast charging speed of about 1.5 hours. Charge your tattoo machine from any USB-C port including your car, laptop, or battery pack. Know where you stand at all times and check your battery life and your voltage through an LED indicator. To not over complicate things, we created a user-friendly interface with only 3 buttons so you can spend more time in your art. Prioritizing your comfort and safety with a lightweight, ergonomic design that packs most of the weight in the center, reducing the strain in your hand.
It’s time to unleash your power, embrace the wireless revolution and create your masterpiece. Say bye, bye to your annoying cables, rotary, coil machine! Even if you’re loyal to the coil, you’ll love the Flux.
- 4 mm Direct Drive: a versatile stroke for lining and color packing
- Lightweight Design: Only 6.3 ounces (178 grams), most of the weight is in the center
- Dynamic Power Path Management: Always get the same amount of power
- LED Indicator: From here you can check your battery life, navigate modes, and change voltage
- Changing Voltage: Decrease and Increase voltage by half increments
- Detachable battery: Switch to the auxiliary Powerbolt battery.
- Battery life: Up to 10 hours. Can charge as quickly as 2 hours when used with a proper voltage USB-C power source and USB-C cord. Note: Longer power cords and weaker power sources will result on the unit taking a long time to charge or not charging at all.
- USB-C port: Charge your wireless tattoo machine in your car, laptop, or from a battery pack
- Bluetooth capability: Pair with Darklab app and connect with different devices
- Darklab App : Change voltage through voice, access tattoo time and receive firmware updates
- Wireless footswitch capable (coming soon)
- Compatible with most membrane needles
- Voltage : 5-12 Volts
- Grip: 33MM
- Handcrafted in the USA
*Please note: With any issues or faults as per FK Irons Instructions please contact them directly before contacting American Body Art, as they will be best in helping with any issues. Link below:




LightningBolt Battery Pack FK Irons
LightningBolt Battery Pack
It’s time to cut the cord. Welcome to the Wireless Revolution!
With the LightingBolt your favorite tattoo machine just became wireless. That’s right! Your favorite rotary machine just got a lot better. The LightingBolt is not only a tattoo battery pack, but a Bluetooth enabled power controller that is truly the future of tattooing. We know the feeling of our arm hurting mid-tattoo, having to stretch, only to lose focus and not concentrate on our craft.
The best tattoo battery pack is here to make your life easier. Small but powerful, the LightingBolt is sure to make your art better. With a lightweight design, friendly user-interface and an ergonomic design, the LightingBolt was made with the artist in mind. The LightingBolt tattoo battery pack was made to help captivate your art effortlessly.
- Immerse yourself in art with a wireless tattoo battery pack that turns your tattoo machine wireless
- Connect to Bluetooth and pair with the DarkLab mobile app to enable a host of features and receive firmware updates. Features include changing voltage through voice
- Ideal for rotary and coil tattoo machines
- Battery can last up to 10 hours with only 1.5 hours of charge time
- Charge your battery pack in any USB-C port, including your car, airport, or laptop. Perfect for the traveling tattoo artist or when you attend a tradeshow
- Software and hardware work seamlessly together to provide you the best experience
- Operates from 5 volts to a maximum of 12 volts
- Only 3 buttons that allow you to check the battery, enable Bluetooth, increase and decrease the voltage, check battery life and turn off/on
- LED color indicator lights allow you to monitor your voltage and battery life
- The best things come in small, powerful packages, LightingBolt weights only 58g (2 oz)
*Please note: With any issues or faults as per FK Irons Instructions please contact them directly before contacting American Body Art, as they will be best in helping with any issues. Link below:



FK Irons EXO Black Ops 4.0 Stroke
FK Irons' latest creation, the EXO is a modular tattoo machine whose core is the same impressively powerful motor as the Flux. From our factory in the USA, the EXO unit is fitted with an RCA module for use with a traditional power supply and RCA cable or the Hover to enable eGive.
Outstanding, new feature:
The RCA module is completely detachable with a simple quarter-turn action and can be replaced with the PowerBolt battery pack to create a wireless option. This new “modular design,” frees the artist to nimbly choose between power sources, with the option to quickly switch between:
- RCA module with RCA cable and traditional power supply
- PowerBolt battery pack for up to 10 hours of wireless tattooing
For artists who want the Flux’s power and also be ready for anything -whether using a cable is the best option in the circumstances, or you want to go wireless - the EXO is the perfect choice.
We offer you even more choices - customize it with a direct drive 2.5mm, 3.2mm or 4mm stroke.
Other features: The EXO’s ergonomic design includes a larger 40mm grip to help ensure your hand isn’t clenched and overly tense. It is forward weighted, aiding the artist with downward needle pressure.
The EXO is eGive ready through the RCA module, RCA cable and Hover, or wirelessly with the Powerbolt and the Darklab app
- FK Irons' first modular machine
- Available in 2.5mm, 3.2mm or 4.0mm stroke options (non-interchangeable)
- 40mm ergonomic wide grip
- Forward weighted, aiding the artist with downward needle pressure
- Powerful, 9-watt brushless motor
- Reverse polarity protection in the RCA module for motor safety
- Wired or wireless (with the Powerbolt set) options for the artist
- Ideal for lining, color packing, and solid color works
- Less passes to saturate ink, reducing skin trauma
- Weighs only 6.8 ounces, 189 grams
- eGive ready, via Hover and RCA cable or wireless Powerbolt and Darklab app
- Compatible with most standard membrane cartridges



FK Irons EXO Black Ops 3.2 Stroke
FK Irons' latest creation, the EXO is a modular tattoo machine whose core is the same impressively powerful motor as the Flux. From our factory in the USA, the EXO unit is fitted with an RCA module for use with a traditional power supply and RCA cable or the Hover to enable eGive.



FK Irons EXO Stealth 4.0 Stroke
FK Irons' latest creation, the EXO is a modular tattoo machine whose core is the same impressively powerful motor as the Flux. From our factory in the USA, the EXO unit is fitted with an RCA module for use with a traditional power supply and RCA cable or the Hover to enable eGive.
Outstanding, new feature:
The RCA module is completely detachable with a simple quarter-turn action and can be replaced with the PowerBolt battery pack to create a wireless option. This new “modular design,” frees the artist to nimbly choose between power sources, with the option to quickly switch between:
- RCA module with RCA cable and traditional power supply
- PowerBolt battery pack for up to 10 hours of wireless tattooing
For artists who want the Flux’s power and also be ready for anything -whether using a cable is the best option in the circumstances, or you want to go wireless - the EXO is the perfect choice.
We offer you even more choices - customize it with a direct drive 2.5mm, 3.2mm or 4mm stroke.
Other features: The EXO’s ergonomic design includes a larger 40mm grip to help ensure your hand isn’t clenched and overly tense. It is forward weighted, aiding the artist with downward needle pressure.
The EXO is eGive ready through the RCA module, RCA cable and Hover, or wirelessly with the Powerbolt and the Darklab app
- FK Irons' first modular machine
- Available in 2.5mm, 3.2mm or 4.0mm stroke options (non-interchangeable)
- 40mm ergonomic wide grip
- Forward weighted, aiding the artist with downward needle pressure
- Powerful, 9-watt brushless motor
- Reverse polarity protection in the RCA module for motor safety
- Wired or wireless (with the Powerbolt set) options for the artist
- Ideal for lining, color packing, and solid color works
- Less passes to saturate ink, reducing skin trauma
- Weighs only 6.8 ounces, 189 grams
- eGive ready, via Hover and RCA cable or wireless Powerbolt and Darklab app
- Compatible with most standard membrane cartridges



FK Irons EXO Stealth 3.2 Stroke
FK Irons' latest creation, the EXO is a modular tattoo machine whose core is the same impressively powerful motor as the Flux. From our factory in the USA, the EXO unit is fitted with an RCA module for use with a traditional power supply and RCA cable or the Hover to enable eGive.
Outstanding, new feature:
The RCA module is completely detachable with a simple quarter-turn action and can be replaced with the PowerBolt battery pack to create a wireless option. This new “modular design,” frees the artist to nimbly choose between power sources, with the option to quickly switch between:
- RCA module with RCA cable and traditional power supply
- PowerBolt battery pack for up to 10 hours of wireless tattooing
For artists who want the Flux’s power and also be ready for anything -whether using a cable is the best option in the circumstances, or you want to go wireless - the EXO is the perfect choice.
We offer you even more choices - customize it with a direct drive 2.5mm, 3.2mm or 4mm stroke.
Other features: The EXO’s ergonomic design includes a larger 40mm grip to help ensure your hand isn’t clenched and overly tense. It is forward weighted, aiding the artist with downward needle pressure.
The EXO is eGive ready through the RCA module, RCA cable and Hover, or wirelessly with the Powerbolt and the Darklab app
- FK Irons' first modular machine
- Available in 2.5mm, 3.2mm or 4.0mm stroke options (non-interchangeable)
- 40mm ergonomic wide grip
- Forward weighted, aiding the artist with downward needle pressure
- Powerful, 9-watt brushless motor
- Reverse polarity protection in the RCA module for motor safety
- Wired or wireless (with the Powerbolt set) options for the artist
- Ideal for lining, color packing, and solid color works
- Less passes to saturate ink, reducing skin trauma
- Weighs only 6.8 ounces, 189 grams
- eGive ready, via Hover and RCA cable or wireless Powerbolt and Darklab app
- Compatible with most standard membrane cartridges








FK Irons LightningBolt UNI Wireless Battery Pack
LightningBolt UNI Wireless Battery Pack
FK Irons strives to develop products to revolutionize and innovate the tattoo industry. That’s why we engineered a powerful battery that’s not only well-balanced but can be universally connected to any RCA machine on the current market. It’s the one battery to power them all.
This revolutionary power supply can be connected to any RCA machine - as long as the RCA jack isn’t blocked. Its compact design is great for easy travel, and it keeps in mind the machine’s Ergonomic Balance Point. Weighing at only 2 oz, the LightningBolt Uni may be small, but can still power your machines for up to 10 hours - depending on voltage. That’s power. The LightningBolt Uni was designed to be the only power supply artists need and provide power for all.
- Immerse yourself in art with a wireless tattoo battery pack that turns your tattoo machine wireless
- Ideal for the EXO and all RCA tattoo machines
- Battery can last up to 10 hours with only 1.5 hours of charge time
- Charge your battery pack in any USB-C port, including your car, airport, or from your laptop. Perfect for the traveling tattoo artist or when you attend a tradeshow
- Software and hardware work seamlessly together to provide you the best experience
- Operates from 5 volts to a maximum of 12 volts
- Only 3 buttons that allow you to check the battery, enable Bluetooth, increase and decrease the voltage, check battery life and turn off/on
- LED color indicator lights allow you to monitor your voltage and battery life
- Good things come in small, powerful packages, LightningBolt UNI weights only 58g (2 oz)
- NOT compatible with the Microbeau Bellar
Due to cross contamination issues, and that all Darklab and FK Irons devices are custom built to order, and as such we do not accept returns. All device sales are final. We do, however, have a guarantee for all of our battery packs.
*Please note: With any issues or faults as per FK Irons Instructions please contact them directly before contacting American Body Art, as they will be best in helping with any issues. Link below:



FK Irons EXO Stealth 2.5 Stroke
FK Irons' latest creation, the EXO is a modular tattoo machine whose core is the same impressively powerful motor as the Flux. From our factory in the USA, the EXO unit is fitted with an RCA module for use with a traditional power supply and RCA cable or the Hover to enable eGive.
Outstanding, new feature:
The RCA module is completely detachable with a simple quarter-turn action and can be replaced with the PowerBolt battery pack to create a wireless option. This new “modular design,” frees the artist to nimbly choose between power sources, with the option to quickly switch between:
- RCA module with RCA cable and traditional power supply
- PowerBolt battery pack for up to 10 hours of wireless tattooing
For artists who want the Flux’s power and also be ready for anything -whether using a cable is the best option in the circumstances, or you want to go wireless - the EXO is the perfect choice.
We offer you even more choices - customize it with a direct drive 2.5mm, 3.2mm or 4mm stroke.
Other features: The EXO’s ergonomic design includes a larger 40mm grip to help ensure your hand isn’t clenched and overly tense. It is forward weighted, aiding the artist with downward needle pressure.
The EXO is eGive ready through the RCA module, RCA cable and Hover, or wirelessly with the Powerbolt and the Darklab app
- FK Irons' first modular machine
- Available in 2.5mm, 3.2mm or 4.0mm stroke options (non-interchangeable)
- 40mm ergonomic wide grip
- Forward weighted, aiding the artist with downward needle pressure
- Powerful, 9-watt brushless motor
- Reverse polarity protection in the RCA module for motor safety
- Wired or wireless (with the Powerbolt set) options for the artist
- Ideal for lining, color packing, and solid color works
- Less passes to saturate ink, reducing skin trauma
- Weighs only 6.8 ounces, 189 grams
- eGive ready, via Hover and RCA cable or wireless Powerbolt and Darklab app
- Compatible with most standard membrane cartridges



FK Irons EXO Black Ops 2.5 Stroke
FK Irons' latest creation, the EXO is a modular tattoo machine whose core is the same impressively powerful motor as the Flux. From our factory in the USA, the EXO unit is fitted with an RCA module for use with a traditional power supply and RCA cable or the Hover to enable eGive.
Outstanding, new feature:
The RCA module is completely detachable with a simple quarter-turn action and can be replaced with the PowerBolt battery pack to create a wireless option. This new “modular design,” frees the artist to nimbly choose between power sources, with the option to quickly switch between:
- RCA module with RCA cable and traditional power supply
- PowerBolt battery pack for up to 10 hours of wireless tattooing
For artists who want the Flux’s power and also be ready for anything -whether using a cable is the best option in the circumstances, or you want to go wireless - the EXO is the perfect choice.
We offer you even more choices - customize it with a direct drive 2.5mm, 3.2mm or 4mm stroke.
Other features: The EXO’s ergonomic design includes a larger 40mm grip to help ensure your hand isn’t clenched and overly tense. It is forward weighted, aiding the artist with downward needle pressure.
The EXO is eGive ready through the RCA module, RCA cable and Hover, or wirelessly with the Powerbolt and the Darklab app
- FK Irons' first modular machine
- Available in 2.5mm, 3.2mm or 4.0mm stroke options (non-interchangeable)
- 40mm ergonomic wide grip
- Forward weighted, aiding the artist with downward needle pressure
- Powerful, 9-watt brushless motor
- Reverse polarity protection in the RCA module for motor safety
- Wired or wireless (with the Powerbolt set) options for the artist
- Ideal for lining, color packing, and solid color works
- Less passes to saturate ink, reducing skin trauma
- Weighs only 6.8 ounces, 189 grams
- eGive ready, via Hover and RCA cable or wireless Powerbolt and Darklab app
- Compatible with most standard membrane cartridges




FK Irons Spektra Xion Stealth
Spektra Xion Stealth
- The first pen-style machine that gives artists full control of parameters to unleash their creative vision.
- Ergonomic and lightweight design for optimal maneuverability. Only 5.35 ounce total weight.
- Convenient interchangeable strokes to suit different styles of tattooing. 3.2mm and 3.7mm Stroke Wheels included with purchase.
- Secure ratcheting system enables artists to lock-in needle depth settings.
- Seamless, adjustable Grip is compatible with all needles.
- The Grip of the machine is autoclavable. Use only steam autoclaves at temperatures no higher than 270° Fahrenheit or 132.222° Celsius.
- Incremental, one-turn Give Knob dial for hard to soft adjustment of needle strike.
- Powerful 6W MotorBolt system - the first motor specifically designed to meet the demands of tattooing.
- Compatible with most power supplies on the market, the Spektra Xion is an all-in-one tool solution for all your tattooing needs.
- Machine Body and MotorBolt can be wiped externally with cold sanitation products.
- Engineered and manufactured in the USA by FK Irons.
*Please note: With any issues or faults as per FK Irons Instructions please contact them directly before contacting American Body Art, as they will be best in helping with any issues. Link below:


Hover Tattoo Power Supply




Hover Tattoo Power Supply
Embrace the wireless revolution with a touchless tattoo power supply. With just a simple air gesture from your hand or hover of your fingers, you can change your voltage, cycle through menu screens and set a timer to register when you start/stop a tattoo session. Without ever touching the device, you will be helping to prevent cross-contamination.
The Hover makes your life easier with its functional, round design, strong magnet, sensors and Bluetooth. Connect to the soon to be deployed Darklab app to change the voltage using voice command and take advantage of the latest firmware updates with ever-developing features.
Equipped with two input ports, you can utilize a machine and footwitch combination or connect two machines at the same time, which is perfect for artists that use different tattoo machines in one sitting. If you need to stop mid-tattoo, the Hover remembers the last voltage you were on. With the bank management system you can save up to 9 of your favorite settings. Quickly set up your machine to your favorite presets for different stages of the tattoo, such as lining, coloring and shading, saving you time!
With USB-A and USB-C ports, charge mobile devices such as tablets, cellphones and Darklab battery packs. The Hover makes travel easy for those artists that are always on the go or attending trade shows.
- Easy to use touch-free power supply
- Prevent cross-contamination
- Increase and decrease voltage with hand gestures
- Bluetooth compatibility allows you to connect with the free Darklab mobile app for Android and iOS
- Darklab mobile app allows you to change voltage through voice, register tattoo time and receive firmware updates
- 9 programmable presets to save desired voltage, you can revisit them at any time
- 2 input ports allow you to connect two different tattoo machines, perfect for artists that use multiple devices
- Footswitch compatible
- USB charging ports that can charge cellphones, tablets and DarkLab power supplies
- 2 – 17 Voltage output
- Machine voltage readout
- Anti-slip magnetic base
- Set a timer to keep track of tattoo session time
**It is recommended and important to use clear barrier film when covering the Hover**
*Please note: With any issues or faults as per FK Irons Instructions please contact them directly before contacting American Body Art, as they will be best in helping with any issues. Link below:
https://www.fkirons.com/pages/request-repair



FK Irons Spektra Direkt 2 Kryptonite
FK Irons Spektra Direkt 2 Kryptonite
The Spektra Direkt 2 tattoo machine uses standard needles and cartridges with ease. It features a grommet-less clip-on armature and a patented Spektra MultiVise System which accepts conventional backstem and screw-on style cartridge grips without the need for adapters. Its body is CNC crafted from one solid rod of 6061 T6 aluminum, mirror polished and anodized for ultimate durability.
Interchangeable Stroke Caps in 2.8mm, 3.4mm and 4.0mm sizes are included with your purchase of this machine. The Hex Drive MotorBolt system is compatible with Direkt 1 and Edge X MotorBolts. Best of all, it's maintenance-free, so no lubrication is needed. Engineered and manufactured in the USA by FK Irons.
- Uses standard needles and cartridges with ease.
- Grommet-less clip-on armature.
- Patented Spektra MultiVise System accepts conventional backstem and screw-on style cartridge grips without the need for adapters.
- CNC crafted from one solid rod of 6061 T6 aluminum, mirror polished and anodized for ultimate durability.
- Interchangeable Stroke Caps in 2.8mm, 3.4mm and 4.0mm sizes included with purchase.
- Made of aircraft grade aluminum, the fully assembled machine weighs only 2.88 ounces.
- Hex Drive MotorBolt system is compatible with Direkt 1 and Edge X MotorBolts.
- Powerful and consistent, the Direkt 2 is silent at high or low voltages.
- Maintenance free - no lubrication required.
- Body anodized for durability in 7 different standard colors.
- Engineered and manufactured in the USA by FK Irons.
*Please note: With any issues or faults as per FK Irons Instructions please contact them directly before contacting American Body Art, as they will be best in helping with any issues. Link below:



Delta FootSwitch Bubble Gum
Delta FootSwitch Bubble Gum
Heavy Duty Precision Footswitch
- The very first Footswitch engineered to sustain your entire tattooing career.
- Ideal for shop and travel, the Delta Footswitch is portable and lightweight.
- Machined from Aircraft grade aluminum and anodized in 7 different standard colors.
- Internal dual springs and hinge system provide exceptional responsiveness.
- No more chasing your Footswitch. Anti-Skid pad keeps the pedal in its place.
- RCA Ready. RCA connection accepts high quality RCA cords. External wiring prevents failure of entire unit.
- Engineered and manufactured in the USA by FK Irons.
Please note: RCA Cable not included
*Please note: With any issues or faults as per FK Irons Instructions please contact them directly before contacting American Body Art, as they will be best in helping with any issues. Link below:



FK Irons Spektra Halo 2 Crossover Gunmetal
FK Irons Spektra Halo 2 Crossover Gunmetal
Our Halo 2 crossover gunmetal tattoo machine features a floating collet vise system, allowing for use of standard and/or screw-on tubes for cartridges and regular needles. Grommetless needle clip + rolling needle guide. The needle self-stabilizes using counter lever forces against a new ball bearing upon clicking in place. This tattoo machine also features a new give mechanism that has been designed to suit standard and cartridge needles granting a wide range of adjustment and up to 4mm of give travel. Its tool-free disassembly makes it easy to clean and maintain. Engineered and manufactured in the USA by FK Irons.
- The Halo 2 features our floating collet vise system, allowing for use of standard and/or screw-on tubes for cartridges and regular needles.
- Grommet-less Needle Clip + Rolling Needle guide: No more grommets or rubber bands. The needle self-stabilizes using counter lever forces against a new ball bearing upon clicking in place.
- The new give mechanism has been designed to suit standard and cartridge needles granting a wide range of adjustment and up to 4mm of give travel.
- High quality Swiss Maxon motor for optimal performance.
- Slip-on Stroke Wheel MotorBolt is compatible with Halo 1 Motors - Includes 2.8mm, 3.4mm and 4.0mm Stroke Wheels with redesigned cams for optimum torque and minimal vibration.
- Made of aircraft grade aluminum, the fully assembled machine weighs only 3.04 ounces.
- Tool-less disassembly for easy cleaning and maintenance.
- Anodized body for durability in 7 different standard colors.
- Engineered and manufactured in the USA by FK Irons
*Please note: With any issues or faults as per FK Irons Instructions please contact them directly before contacting American Body Art, as they will be best in helping with any issues. Link below:



FK Irons Spektra Halo 2 Crossover Tangerine
FK Irons Spektra Halo 2 Crossover Tangerine
Our Halo 2 crossover gunmetal tattoo machine features a floating collet vise system, allowing for use of standard and/or screw-on tubes for cartridges and regular needles. Grommetless needle clip + rolling needle guide. The needle self-stabilizes using counter lever forces against a new ball bearing upon clicking in place. This tattoo machine also features a new give mechanism that has been designed to suit standard and cartridge needles granting a wide range of adjustment and up to 4mm of give travel. Its tool-free disassembly makes it easy to clean and maintain. Engineered and manufactured in the USA by FK Irons.
- The Halo 2 features our floating collet vise system, allowing for use of standard and/or screw-on tubes for cartridges and regular needles.
- Grommet-less Needle Clip + Rolling Needle guide: No more grommets or rubber bands. The needle self-stabilizes using counter lever forces against a new ball bearing upon clicking in place.
- The new give mechanism has been designed to suit standard and cartridge needles granting a wide range of adjustment and up to 4mm of give travel.
- High quality Swiss Maxon motor for optimal performance.
- Slip-on Stroke Wheel MotorBolt is compatible with Halo 1 Motors - Includes 2.8mm, 3.4mm and 4.0mm Stroke Wheels with redesigned cams for optimum torque and minimal vibration.
- Made of aircraft grade aluminum, the fully assembled machine weighs only 3.04 ounces.
- Tool-less disassembly for easy cleaning and maintenance.
- Anodized body for durability in 7 different standard colors.
- Engineered and manufactured in the USA by FK Irons
*Please note: With any issues or faults as per FK Irons Instructions please contact them directly before contacting American Body Art, as they will be best in helping with any issues. Link below:



FK Irons Spektra Halo 2 Crossover Seafoam
FK Irons Spektra Halo 2 Crossover Seafoam
Our Halo 2 crossover gunmetal tattoo machine features a floating collet vise system, allowing for use of standard and/or screw-on tubes for cartridges and regular needles. Grommetless needle clip + rolling needle guide. The needle self-stabilizes using counter lever forces against a new ball bearing upon clicking in place. This tattoo machine also features a new give mechanism that has been designed to suit standard and cartridge needles granting a wide range of adjustment and up to 4mm of give travel. Its tool-free disassembly makes it easy to clean and maintain. Engineered and manufactured in the USA by FK Irons.
- The Halo 2 features our floating collet vise system, allowing for use of standard and/or screw-on tubes for cartridges and regular needles.
- Grommet-less Needle Clip + Rolling Needle guide: No more grommets or rubber bands. The needle self-stabilizes using counter lever forces against a new ball bearing upon clicking in place.
- The new give mechanism has been designed to suit standard and cartridge needles granting a wide range of adjustment and up to 4mm of give travel.
- High quality Swiss Maxon motor for optimal performance.
- Slip-on Stroke Wheel MotorBolt is compatible with Halo 1 Motors - Includes 2.8mm, 3.4mm and 4.0mm Stroke Wheels with redesigned cams for optimum torque and minimal vibration.
- Made of aircraft grade aluminum, the fully assembled machine weighs only 3.04 ounces.
- Tool-less disassembly for easy cleaning and maintenance.
- Anodized body for durability in 7 different standard colors.
- Engineered and manufactured in the USA by FK Irons
*Please note: With any issues or faults as per FK Irons Instructions please contact them directly before contacting American Body Art, as they will be best in helping with any issues. Link below:



FK Irons Spektra Halo 2 Crossover Stealth
FK Irons Spektra Halo 2 Crossover Stealth
Our Halo 2 crossover gunmetal tattoo machine features a floating collet vise system, allowing for use of standard and/or screw-on tubes for cartridges and regular needles. Grommetless needle clip + rolling needle guide. The needle self-stabilizes using counter lever forces against a new ball bearing upon clicking in place. This tattoo machine also features a new give mechanism that has been designed to suit standard and cartridge needles granting a wide range of adjustment and up to 4mm of give travel. Its tool-free disassembly makes it easy to clean and maintain. Engineered and manufactured in the USA by FK Irons.
- The Halo 2 features our floating collet vise system, allowing for use of standard and/or screw-on tubes for cartridges and regular needles.
- Grommet-less Needle Clip + Rolling Needle guide: No more grommets or rubber bands. The needle self-stabilizes using counter lever forces against a new ball bearing upon clicking in place.
- The new give mechanism has been designed to suit standard and cartridge needles granting a wide range of adjustment and up to 4mm of give travel.
- High quality Swiss Maxon motor for optimal performance.
- Slip-on Stroke Wheel MotorBolt is compatible with Halo 1 Motors - Includes 2.8mm, 3.4mm and 4.0mm Stroke Wheels with redesigned cams for optimum torque and minimal vibration.
- Made of aircraft grade aluminum, the fully assembled machine weighs only 3.04 ounces.
- Tool-less disassembly for easy cleaning and maintenance.
- Anodized body for durability in 7 different standard colors.
- Engineered and manufactured in the USA by FK Irons
*Please note: With any issues or faults as per FK Irons Instructions please contact them directly before contacting American Body Art, as they will be best in helping with any issues. Link below:



FK Irons Spektra Direkt 2 Ruby
FK Irons Spektra Direkt 2 Ruby
The Spektra Direkt 2 tattoo machine uses standard needles and cartridges with ease. It features a grommet-less clip-on armature and a patented Spektra MultiVise System which accepts conventional backstem and screw-on style cartridge grips without the need for adapters. Its body is CNC crafted from one solid rod of 6061 T6 aluminum, mirror polished and anodized for ultimate durability.
Interchangeable Stroke Caps in 2.8mm, 3.4mm and 4.0mm sizes are included with your purchase of this machine. The Hex Drive MotorBolt system is compatible with Direkt 1 and Edge X MotorBolts. Best of all, it's maintenance-free, so no lubrication is needed. Engineered and manufactured in the USA by FK Irons.
- Uses standard needles and cartridges with ease.
- Grommet-less clip-on armature.
- Patented Spektra MultiVise System accepts conventional backstem and screw-on style cartridge grips without the need for adapters.
- CNC crafted from one solid rod of 6061 T6 aluminum, mirror polished and anodized for ultimate durability.
- Interchangeable Stroke Caps in 2.8mm, 3.4mm and 4.0mm sizes included with purchase.
- Made of aircraft grade aluminum, the fully assembled machine weighs only 2.88 ounces.
- Hex Drive MotorBolt system is compatible with Direkt 1 and Edge X MotorBolts.
- Powerful and consistent, the Direkt 2 is silent at high or low voltages.
- Maintenance free - no lubrication required.
- Body anodized for durability in 7 different standard colors.
- Engineered and manufactured in the USA by FK Irons.
*Please note: With any issues or faults as per FK Irons Instructions please contact them directly before contacting American Body Art, as they will be best in helping with any issues. Link below:



FK Irons Spektra Direkt 2 Stealth
FK Irons Spektra Direkt 2 Stealth
The Spektra Direkt 2 tattoo machine uses standard needles and cartridges with ease. It features a grommet-less clip-on armature and a patented Spektra MultiVise System which accepts conventional backstem and screw-on style cartridge grips without the need for adapters. Its body is CNC crafted from one solid rod of 6061 T6 aluminum, mirror polished and anodized for ultimate durability.
Interchangeable Stroke Caps in 2.8mm, 3.4mm and 4.0mm sizes are included with your purchase of this machine. The Hex Drive MotorBolt system is compatible with Direkt 1 and Edge X MotorBolts. Best of all, it's maintenance-free, so no lubrication is needed. Engineered and manufactured in the USA by FK Irons.
- Uses standard needles and cartridges with ease.
- Grommet-less clip-on armature.
- Patented Spektra MultiVise System accepts conventional backstem and screw-on style cartridge grips without the need for adapters.
- CNC crafted from one solid rod of 6061 T6 aluminum, mirror polished and anodized for ultimate durability.
- Interchangeable Stroke Caps in 2.8mm, 3.4mm and 4.0mm sizes included with purchase.
- Made of aircraft grade aluminum, the fully assembled machine weighs only 2.88 ounces.
- Hex Drive MotorBolt system is compatible with Direkt 1 and Edge X MotorBolts.
- Powerful and consistent, the Direkt 2 is silent at high or low voltages.
- Maintenance free - no lubrication required.
- Body anodized for durability in 7 different standard colors.
- Engineered and manufactured in the USA by FK Irons.
*Please note: With any issues or faults as per FK Irons Instructions please contact them directly before contacting American Body Art, as they will be best in helping with any issues. Link below:



FK Irons Spektra Direkt 2 Gunmetal
The Spektra Direkt 2 tattoo machine uses standard needles and cartridges with ease. It features a grommet-less clip-on armature and a patented Spektra MultiVise System which accepts conventional backstem and screw-on style cartridge grips without the need for adapters. Its body is CNC crafted from one solid rod of 6061 T6 aluminum, mirror polished and anodized for ultimate durability.
Interchangeable Stroke Caps in 2.8mm, 3.4mm and 4.0mm sizes are included with your purchase of this machine. The Hex Drive MotorBolt system is compatible with Direkt 1 and Edge X MotorBolts. Best of all, it's maintenance-free, so no lubrication is needed. Engineered and manufactured in the USA by FK Irons.
- Uses standard needles and cartridges with ease.
- Grommet-less clip-on armature.
- Patented Spektra MultiVise System accepts conventional backstem and screw-on style cartridge grips without the need for adapters.
- CNC crafted from one solid rod of 6061 T6 aluminum, mirror polished and anodized for ultimate durability.
- Interchangeable Stroke Caps in 2.8mm, 3.4mm and 4.0mm sizes included with purchase.
- Made of aircraft grade aluminum, the fully assembled machine weighs only 2.88 ounces.
- Hex Drive MotorBolt system is compatible with Direkt 1 and Edge X MotorBolts.
- Powerful and consistent, the Direkt 2 is silent at high or low voltages.
- Maintenance free - no lubrication required.
- Body anodized for durability in 7 different standard colors.
- Engineered and manufactured in the USA by FK Irons.
*Please note: With any issues or faults as per FK Irons Instructions please contact them directly before contacting American Body Art, as they will be best in helping with any issues. Link below:




Delta FootSwitch Kryptonite
Delta FootSwitch Kryptonite
Heavy Duty Precision Footswitch
- The very first Footswitch engineered to sustain your entire tattooing career.
- Ideal for shop and travel, the Delta Footswitch is portable and lightweight.
- Machined from Aircraft grade aluminum and anodized in 7 different standard colors.
- Internal dual springs and hinge system provide exceptional responsiveness.
- No more chasing your Footswitch. Anti-Skid pad keeps the pedal in its place.
- RCA Ready. RCA connection accepts high quality RCA cords. External wiring prevents failure of entire unit.
- Engineered and manufactured in the USA by FK Irons.
Please note: RCA Cable not included
*Please note: With any issues or faults as per FK Irons Instructions please contact them directly before contacting American Body Art, as they will be best in helping with any issues. Link below:




Delta FootSwitch Gunmetal
Delta FootSwitch Gunmetal
Heavy Duty Precision Footswitch
- The very first Footswitch engineered to sustain your entire tattooing career.
- Ideal for shop and travel, the Delta Footswitch is portable and lightweight.
- Machined from Aircraft grade aluminum and anodized in 7 different standard colors.
- Internal dual springs and hinge system provide exceptional responsiveness.
- No more chasing your Footswitch. Anti-Skid pad keeps the pedal in its place.
- RCA Ready. RCA connection accepts high quality RCA cords. External wiring prevents failure of entire unit.
- Engineered and manufactured in the USA by FK Irons.
Please note: RCA Cable not included
*Please note: With any issues or faults as per FK Irons Instructions please contact them directly before contacting American Body Art, as they will be best in helping with any issues. Link below:

FK Irons Click Ergo Cartridge Grip Tangerine
FK Irons Click Ergo Cartridge Grip Tangerine
- Tapered from 25mm to 32mm for optimal comfort, the Click Ergo fits all hand sizes and supports a natural ergonomic drawing position.
- Get closer to the cartridge than ever for ultimate precision and control.
- Redesigned groove pattern provides a supported index rest and, helps relieve hand fatigue.
- Tool-less disassembly allows for safe sterilization. Compatible with autoclaves and cold sterilization methods.
- Ratchet Disc click system prevents involuntary turning even with heavy machines.
- 3mm center bore is compatible with all built in drive bar machines.
- Autoclavable Drive Bar included with each grip.
- Anodized for durability and available in 7 colors.
- Engineered and manufactured in the USA by FK Irons
*Please note: With any issues or faults as per FK Irons Instructions please contact them directly before contacting American Body Art, as they will be best in helping with any issues. Link below:

FK Irons Click Ergo Cartridge Grip Kryptonite
FK Irons Click Ergo Cartridge Grip Kryptonite
- Tapered from 25mm to 32mm for optimal comfort, the Click Ergo fits all hand sizes and supports a natural ergonomic drawing position.
- Get closer to the cartridge than ever for ultimate precision and control.
- Redesigned groove pattern provides a supported index rest and, helps relieve hand fatigue.
- Tool-less disassembly allows for safe sterilization. Compatible with autoclaves and cold sterilization methods.
- Ratchet Disc click system prevents involuntary turning even with heavy machines.
- 3mm center bore is compatible with all built in drive bar machines.
- Autoclavable Drive Bar included with each grip.
- Anodized for durability and available in 7 colors.
- Engineered and manufactured in the USA by FK Irons
*Please note: With any issues or faults as per FK Irons Instructions please contact them directly before contacting American Body Art, as they will be best in helping with any issues. Link below:

FK Irons Click Ergo Cartridge Grip Stealth
Click Ergo Cartridge Grip Stealth
- Tapered from 25mm to 32mm for optimal comfort, the Click Ergo fits all hand sizes and supports a natural ergonomic drawing position.
- Get closer to the cartridge than ever for ultimate precision and control.
- Redesigned groove pattern provides a supported index rest and, helps relieve hand fatigue.
- Tool-less disassembly allows for safe sterilization. Compatible with autoclaves and cold sterilization methods.
- Ratchet Disc click system prevents involuntary turning even with heavy machines.
- 3mm center bore is compatible with all built in drive bar machines.
- Autoclavable Drive Bar included with each grip.
- Anodized for durability and available in 7 colors.
- Engineered and manufactured in the USA by FK Irons
*Please note: With any issues or faults as per FK Irons Instructions please contact them directly before contacting American Body Art, as they will be best in helping with any issues. Link below:


FK Irons Xion Grip Gorilla Black
XION Grip Gorilla Black
-
Gorilla XION oem grip, fits all XION models.
40MM Grip
*Please note: With any issues or faults as per FK Irons Instructions please contact them directly before contacting American Body Art, as they will be best in helping with any issues. Link below:




FK Irons Spektra Xion Tangerine
FK Irons Spektra Xion Tangerine
- The first pen-style machine that gives artists full control of parameters to unleash their creative vision.
- Ergonomic and lightweight design for optimal maneuverability.
- Convenient interchangeable strokes to suit different styles of tattooing. 3.2mm and 3.7mm Stroke Wheels included with purchase.
- Made of aircraft grade aluminum, the fully assembled machine weighs only 5.36 ounces
- Machine color is infused by a sophisticate electrochemical process called anodizing. Won't fade for 10-20 years if treated as instructed.
- Secure ratcheting system enables artists to lock-in needle depth settings.
- Seamless, adjustable Grip is compatible with all needles.
- The grip of the machine is autoclavable. Use only steam autoclaves at temperatures no higher than 270° Fahrenheit or 132.222° Celsius.
- Incremental, one turn Give Knob dial for hard to soft adjustment of needle strike.
- Powerful 6W MotorBolt system - the first motor specifically designed to meet the demands of tattooing.
- Compatible with most power supplies on the market, the Spektra Xion is an all-in-one tool solution for all your tattooing needs.
- Machine Body and MotorBolt can be wiped externally with cold sanitation products.
- Engineered and manufactured in the USA by FK Irons.
*Please note: With any issues or faults as per FK Irons Instructions please contact them directly before contacting American Body Art, as they will be best in helping with any issues. Link below: