OrderlyEmails - Recommended Products
This collection is used by the OrderlyEmails app, to make product recommendations in your notification emails, which automatically update over time.
- This service is currenty provided for FREE, with any theme purchase.
- Recommended products shown in your email are automatically updated every 4 hours, to match this collection.
- By default, your Best-Selling products (that are in stock & not already purchased) will be recommended.
- You can modify the rules below to change which products are recommended. Products at the top of the list are more likely to be shown.
- To enable/disable recommendations in your emails, login to the OrderlyEmails app (Shopify Admin -> Apps) and add the "Recommended products" section to an email in the editor.
Note: This collection is "hidden", it is not be visible on your website.
Carton - NITRILE BLACK SaniHealth RAVEN
Sanihealth Black Nitrile Gloves - Raven
Nitrile High Strength Flexi Fit - Latex Free
- Colour: Premium Black
- Quantity: 100 gloves per box
- Material: Nitrile, powder-free, non-sterile
- High flexibility up to 780% elongation
- Balanced strength, comfort & flexibility
- Micro textured for superior grip
CARTON - LATEX BLACK SaniHealth NIGHTHAWK
Sanihealth Nighthawk Black Latex Gloves
- Colour: Midnight Black
- Quantity: 100 gloves per box
- Material: Latex, powder-free, non-sterile
- High haptic sensation
- Balanced strength, comfort & flexibility
- Micro finger textured
- Midnight black absorbs hi-intensity overhead lighting and minimizes reflection
Trident 24kt Gold PVD Titanium Threadless 9 Curved Prong Set Jeweled Attachment
Trident 24kt Gold PVD Titanium Threadless 9 Curved Prong Set Jeweled Attachment
Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
14kt Gold Threadless - Dagger
14kt Gold Threadless - Dagger
Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Length / 6.0mm - Width / 4.2mm
- Black Crystal Size: 1.0mm x 4pcs
Pin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
14kt Gold Threadless - Palm Tree w Green Jewel
14kt Gold Threadless - Palm Tree w Green Jewel
Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Length / 5.4mm - Width / 4.7mm
- Green Crystal Size: 1.5mm x 1pcs
Pin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
14kt Gold Threadless - Flat Duck
14kt Gold Threadless - Flat Duck
Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Length / 3.2mm - Width / 3.1
Pin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
14kt Gold Threadless - Wishbone With 1 Jewel CZ
14kt Gold Threadless - Wishbone With 1 Jewel CZ Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Length / 5.9mm - Width / 2.8mm
- Blue Crystal Size: 1.0mm x 1pcs
Pin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
14kt Gold Threadless - Jeweled Crab
14kt Gold Threadless - Jeweled Crab
Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Length / 6.9mm - Width / 3.9mm
- Blue Crystal Size: 0.9mm - 2pcs
- Oval Crystal size: 3.0mm x 2.0mm - 1pcs
Pin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
14kt Gold Threadless - Robot With Blue Jewel
14kt Gold Threadless - Robot With Blue Jewel
Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Length / 4.0mm - Width / 3.1mm
Aqua Crystal Size: 1.6mm x 1pcs
Pin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
14kt Gold Threadless - Beveled Edge Cross
14kt Gold Threadless - Beveled Edge Cross
Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Length / 4.7mm - Width / 3.5mm
Pin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
14kt Gold Threadless - Wishbone
14kt Gold Threadless - Wishbone Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Length / 4.9mm - Width / 3.2mm
Crystal Size: 0.9mm x 2pcsPin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
14kt Gold Threadless Bronty - Brown Baguette With Green Stone
14kt Gold Threadless Bronty - Brown Baguette With Green Stone Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Length / 4.4mm - Width / 3.7mm
- Green Crystal Size: 1.5mm - 1pcs
- Baguette Crystal Size: 3.0mm x 2.0mm - 1pcs
Pin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
14kt Gold Threadless Cute - Squared Crystal w Pastel Blue Stone
14kt Gold Threadless Cute - Squared Crystal w Pastel Blue Stone Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Length / 5.7mm - Width / 3.4mm
- Pastel Blue Crystal Size: 2.0mm x 1pcs
- Square Crystal Size: 2.5mm x 1pcs
Pin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
14kt Gold Jewel Crown Hinge Ring
14kt Gold Jewel Crown Hinge Ring
Made out of Solid 14kt Gold Nickel Free.
Bar Gauge: 1.0mm / 18GA Length: 8mm
- Crystal Size: 1.0mm x 9pcs
- Dark Ruby Crystal Size: 1.1mm x 5pcs
This 14kt Gold Jewel Hinge Ring is a stunning piece of jewelry that combines elegance and sophistication. Crafted from high-quality 14kt gold, this ring features a unique hinge design that adds a touch of modernity to its classic appeal. Adorned with beautiful rubies, the ring exudes a vibrant and luxurious aura. Whether worn as a statement piece or as a symbol of love and commitment, this exquisite ring is sure to captivate attention.
14kt Gold Threadless - Skull With Daisies
14kt Gold Threadless - Skull With Daisies
Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Length / 7.3mm - Width / 7.4mm
Crystal Size: 1.0mm x 5pcs
Pin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
Trident Threadless Square Jewel Attachment
Trident Threadless Square Jewel Attachment
- Size: 4.8mm x 7.6mm
Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
Trident Black PVD Titanium Internally Threaded Black Baguette w Dangle Spike Attachment
Trident Black PVD Titanium Internally Threaded Black Baguette w Dangle Spike Attachment 0.9mm (16G)
Internally Threaded Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.
PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint). It’s impregnating the object.
Black titanium nitride applied via PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).
As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.
Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.
Trident 24kt Gold PVD Titanium Internally Threaded 2 Prong Mini Navel
Trident 24kt Gold PVD Titanium Internally Threaded 2 Prong Mini Navel
1.6mm x 10mm - 4mm x 6mm Stones
Internally Threaded Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the titanium surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.
PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint).
PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).
As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.
Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.
14kt Gold Threadless - Jewel Z
14kt Gold Threadless - Jewel Z
Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Length / 4.9mm - Width / 3.7mm
- Crystal Size: 0.9mm x 9pcs
Pin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
14kt Gold Threadless - Jewel Y
14kt Gold Threadless - Jewel Y
Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Length / 4.7mm - Width / 3.9mm
- Crystal Size: 0.9mm x 6pcs
Pin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
14kt Gold Threadless - Jewel X
14kt Gold Threadless - Jewel X
Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Length / 4.8mm - Width / 4.2mm
- Crystal Size: 0.9mm x 8pcs
Pin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
14kt Gold Threadless - Jewel W
14kt Gold Threadless - Jewel W
Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Length / 5.2mm - Width / 3.9mm
- Crystal Size: 0.9mm x 9pcs
Pin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
14kt Gold Threadless - Jewel V
14kt Gold Threadless - Jewel V
Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Length / 4.8mm - Width / 3.8mm
- Crystal Size: 0.9mm x 7pcs
Pin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
14kt Gold Threadless - Jewel U
14kt Gold Threadless - Jewel U
Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Length / 4.8mm - Width / 3.8mm
- Crystal Size: 0.9mm x 8pcs
Pin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
14kt Gold Threadless - Jewel T
14kt Gold Threadless - Jewel T
Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Length / 5.0mm - Width / 3.9mm
- Crystal Size: 0.9mm x 6pcs
Pin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
14kt Gold Threadless - Jewel S
14kt Gold Threadless - Jewel S
Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Length / 5.3mm - Width / 3.6mm
- Crystal Size: 0.9mm x 8pcs
Pin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
14kt Gold Threadless - Jewel R
14kt Gold Threadless - Jewel R
Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Length / 4.7mm - Width / 3.8mm
- Crystal Size: 0.9mm x 10pcs
Pin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
14kt Gold Threadless - Jewel Q
14kt Gold Threadless - Jewel Q
Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Length / 5.7mm - Width / 4.5mm
- Crystal Size: 0.9mm x 10pcs
Pin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
14kt Gold Threadless - Jewel P
14kt Gold Threadless - Jewel P
Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Length / 4.8mm - Width / 3.5mm
- Crystal Size: 0.9mm x 8pcs
Pin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
14kt Gold Threadless - Jewel O
14kt Gold Threadless - Jewel O
Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Length / 5.0mm - Width / 4.5mm
- Crystal Size: 0.9mm x 10pcs
Pin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
14kt Gold Threadless - Jewel N
14kt Gold Threadless - Jewel N
Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Length / 4.7mm - Width / 3.7mm
- Crystal Size: 0.9mm x 10pcs
Pin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
14kt Gold Threadless - Jewel M
14kt Gold Threadless - Jewel M
Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Length / 4.9mm - Width / 4.5mm
- Crystal Size: 0.9mm x 11pcs
Pin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
14kt Gold Threadless - Jewel L
14kt Gold Threadless - Jewel L
Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Length / 4.7mm - Width / 3.5mm
- Crystal Size: 0.9mm x 6pcs
Pin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
14kt Gold Threadless - Jewel K
14kt Gold Threadless - Jewel K
Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Length / 4.8mm - Width / 3.9mm
- Crystal Size: 0.9mm x 9pcs
Pin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
14kt Gold Threadless - Jewel J
14kt Gold Threadless - Jewel J
Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Length / 5.1mm - Width / 2.8mm
- Crystal Size: 0.9mm x 6pcs
Pin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
14kt Gold Threadless - Jewel I
14kt Gold Threadless - Jewel I
Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Length / 4.9mm - Width / 1.1mm
- Crystal Size: 0.9mm x 4pcs
Pin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
14kt Gold Threadless - Jewel H
14kt Gold Threadless - Jewel H
Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Length / 4.8mm - Width / 3.8mm
- Crystal Size: 0.9mm x 9pcs
Pin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.