14kt Gold Threadless - 3 Ball                                                                                                  Made out of Nickle free solid 14kt Gold & implant grade steel pin. 

Piece Size: Length / 1.8mm  -  Width / 1.8mm

Pin Gauge: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

Trident Titanium 24kt Gold PVD Threadless Floating Navel

Threadless Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

Threadless Steel Nipple Heart With Bezel Crystal 1.6 x 14mm

Platinum Raptor Cartridge Curved Magnum - Bugpin

Box of 20 cartridges:

• 0.30mm (10 gauge) Long Taper
• 0.27mm (8 gauge) Long Taper - Bigger Sizes
• Experience unparalleled ink flow
• Visibility with the see-through, detachable tip to visibly see ink-flow and make slight adjustments.
• Perfectly tensioned diaphragm prevents back-flow and minimizes motor stress for a smooth, low vibration experience.
• Disposable.
• Designed in the Australia

Platinum Raptor Cartridge Magnum - Medium Taper

Box of 20 cartridges:

• 0.35mm (12 gauge) Medium Taper
• Experience unparalleled ink flow
• Visibility with the see-through, detachable tip to visibly see ink-flow and make slight adjustments.
• Perfectly tensioned diaphragm prevents back-flow and minimizes motor stress for a smooth, low vibration experience.
• Disposable.
• Designed in the Australia

Platinum Raptor Cartridge Round Shader - Medium Taper

Box of 20 cartridges:

• 0.30mm (10 gauge) Medium Taper
• Experience unparalleled ink flow
• Visibility with the see-through, detachable tip to visibly see ink-flow and make slight adjustments.
• Perfectly tensioned diaphragm prevents back-flow and minimizes motor stress for a smooth, low vibration experience.
• Disposable.
• Designed in the Australia

14kt Gold Threadless - Hollow Heart                                                                                    

Made out of Nickle free solid 14kt Gold & implant grade steel pin. 

Piece Size: Length / 3.1mm  -  Width / 3.6mm

Pin Gauge: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

Thermal Carrier Clear

Thermal Acetate Carrier for 11” Paper – Price per 1

For the proper and best transfer results, use this Thermal Carrier for 11” thermal copier paper. The carrier is to be used with the paper and thermal copier machines for a smooth, detailed transfer. It also helps protect the transport rollers from damage and wax residue, which can affect transport. Carriers can be used more than once, but must be replaced when it has lost its shape or becomes dirty. This listing is for one carrier.

Specifications:

• For use with 11” thermal copier paper
• Facilitates smooth, detailed stencil transfers
  
• Good for multiple uses
• Manufactured in Germany
• Price per one carrier

Trident 24kt Gold PVD Titanium Internally Threaded Oval Navel

1.6 x 10mm

Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the titanium surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.

PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint).

PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).

As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.  

Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.

Trident Titanium Dangle Trio

1.8mm Internal Diameter Ring

Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Bespoke Ear Stack 14 - Mixed Paved Colour Stones | Small | Medium | Large 

Bespoke Ear Stack 13 - Marquise Purple | Marquise Emerald | Marquise Pink

Bespoke Ear Stack 12 - Marquise CZ | Marquise Aqua | Marquise Rose

Bespoke Ear Stack 10 - Paved Pearl | Blue Stone | 3 Drop Stones

Trident 24kt Gold PVD Titanium Internally Threaded Unicorn Attachment 0.9mm

• Size: 5.6mm x 7.5mm

Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the titanium surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.

PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint).

PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).

As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.  

Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.

Trident Internally Threaded Unicorn Attachment 0.9mm

• Size: 5.6mm x 7.5mm

Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Trident Threadless Sword Dangle w CZ Oval Attachment

• Sword Size: 10mm
• Crystal Size: 1.5mm x 3mm

Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

Trident Threadless 6 Petal Flower Jewelled Attachment

Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless Attachment - Marta Left                                                                      Made out of Nickle free solid 14kt Gold & implant grade steel pin. Three marquise stones alongside a 2mm round prong set crystal. 

Piece Size:  Length / 7.5mm  -  Width / 4.3mm 

Pin Gauge: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless Attachment - Marta Right                                                                     Made out of Nickle free solid 14kt Gold & implant grade steel pin. Three marquise stones alongside a 2mm round prong set crystal. 

Piece Size:  Length / 7.5mm  -  Width / 4.3mm 

Pin Gauge: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

Solid Ink Bordeaux - 1oz

Great for flowers, deep and bright, perfect to combine in transitions with red and violet, this is the darkest you can get in pure magenta.

All of our pigments are vegan and cruelty free. Made in the USA.

****Expired Sterile Date**** 

Flat Magnum Tattoo Needles

Box Qty: 50pcs

14kt Gold Threadless - Flat Dinosaur                                                                                   

Made out of Nickle free solid 14kt Gold & implant grade steel pin. 

Piece Size: Length / 6.3mm  -  Width / 5.3mm

Pin Gauge: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

Trident Internally Threaded Jewel Fox Attachment

• Size: 5.9mm x 6.2mm
  

Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Trident Internally Threaded Jewel Cat Ears Attachment

• Size: 6.7mm x 4.8mm
  

Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Trident Internally Threaded Jewel Dinosaur Attachment

• Size: 9.5mm x 5.3mm
  

Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Gold PVD Flower EarSafe Hangsell

Rainbow

4mm

Features

The Belar Air PMU devices are popular choices among PMU artists and the batteries can now be purchased separately. Artists now have the option to keep backup batteries on hand and never have to worry about running out of power in the middle of a session. Having extra batteries also allows PMU artists to work more efficiently, as they can switch out batteries without having to stop and wait for them to recharge.

Allow artists to focus on their craft and give their clients the best possible experience, without worrying about interruptions.

*Please note: With any issues or faults as per FK Irons Instructions please contact them directly before contacting American Body Art, as they will be best in helping with any issues. Link below:

https://www.fkirons.com/pages/request-repair

Solid Ink Vanilla - Size: 1oz

Vanilla, a blend specially created to twist your colors and do highlights, try this instead of white to cut your ink, or just have fun with it !

All of our pigments are vegan and cruelty free.

Made in the USA.

Solid Ink Tim Hendricks Magic Mix Set - Size: 4oz

Finally out! Tim Hendricks Magic Mix is here!This set includes a Black and 4 tones of Grey, formulated by the black and grey legend from the West Coast, Tim Hendricks.
Tim has worked together with Solid to develop the perfect tones to perform the smoothest work.
Black
Dark (Single Needle Mix)
Medium
Light
Feather Light
Black: A great black for all around lining and solid fill work. Heals dark and bold.

Dark / Single Needle Mix: A very dark mix for those tones where black is too dark but a medium mix is too light. Great for smoothing the fade between a medium tone to a black tone. Also great for single needle work, when you dont want too dark of a black but still need a strong enough black for line work.

Medium: A strong medium tone, definitely tends to be a most used tone. Great for whipping soft gradations from a black area and darkening up lighter tones a bit.

Light: A velvety smooth tone for your end fades and softer areas

Feather Light: As light as it gets, for those tones that are almost unnoticeable but make a huge difference on what your eye sees. Also good for blood lining your stencil with an extra soft shade.

All of our pigments are vegan and cruelty free. Made in the USA.

Solid Ink Tiger 1oz

Great for tigers, if you like them in the orange hues, also mix with El Dorado and Brown to simplify your "TigerStyle".

All of our pigments are vegan and cruelty free. Made in the USA.

Solid Ink Purple 1oz

This is the right purple, not dark and not too light, it's the perfect mid tone purple. You will find that goes in better that any other purple out there, and stays nice and bright.

All of our pigments are vegan and cruelty free.

Made in the USA.

Solid Ink Mold 1oz

Green and brownish looking tone, goes great combined with Olive, and is a great color for Neo Traditional work, for those fancy leaves and anything that your imagination brings.

All of our pigments are vegan and cruelty free.

Made in the USA.