Trident 24kt Gold PVD Titanium Internally Threaded Mini Moon Attachment 0.9mm (16G)

Size: 2.4mm x 3.5mm

Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the titanium surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.

PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint).

PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).

As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.  

Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.

Trident Threadless 6 Stars. Cable Chains With Hanging Stones Attachment

Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

Trident Titanium Dangle Dagger

Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

***US EXPIRY DATE - 5/11/25***

Dynamic Ink Mixing Solution 4oz

Our 00 Mixing Solution is the perfect companion product to mix and thin down Dynamic Inks to create different washes. We use the purest hospital-grade water, which is filtered, distilled and UV treated in our facility, to ensure our solution has the utmost purity and is held to the highest standard. The witch hazel in this solution not only adds a visible smoothness to your work but also brings a soothing quality and feeling to your clients.

Dynamic Tattoo Ink is a pre-dispersed, premium ink created to provide artists with bolder, long-lasting colors. Dynamic is known for creating black pigment that goes easily into the skin, stands out boldly, and maintains its darkness even after healing.

This standard versatile Dynamic Black Ink is ideal for lining, shading, and tribal work. Aside from standard tattooing procedures, it can also be used to blend and create new washes. 

Specifications:

• Size: 4oz
• Also used to blend and create washes
• Made in the USA

Sterilized Individually Packaged Box 20pcs

Memory Foam Grip Covers for Stainless Steel or Disposable

1" Tattoo Tube Grip

Ink Bottle Mixer

Mix your inks with this ink mixer. 

Mixing time: 5 seconds Speed: 5200 rpm Net weight: 370 g Dimensions: 160x110x85mm HOW TO USE： 1. Plug in the power supply. 2. Place the bottle in the machine. Gently squeeze the bottle 4. Mixing is complete after approx. 5 seconds.

Trident Double Cluster Hinged Ring

Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Trident Internally Threaded Jewelled 3 Stone Bar Attachment 16G

Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Adjustable 32mm Aluminium Cartridge Grip

• Length: 80mm-83mm
• Size: 32mm
• Material: Aluminium

Trident Internally Threaded 2 Jewel Cluster Crystals And Opal Attachment 0.9mm Thread

Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Trident Titanium Hinged Cluster 1.2mm x 8mm

Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Trident Internally Threaded Trio Opal Attachment 16g

Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Hexko X - Power Supply The new Hexko Power Supply
The design and performance was created for the artist to work easily and at their best. Hardware and software optimization for processing speed. Easy-to-use interface and innovative features. The speed of the HEXKO touch screen is super fast.

- 5" TFT LCD 800x480 display with full touch screen capability
- Accepts standard 1/4" mono jacks clip cord and footswitch connections
- Voltage memory and name set up on mobile application
- Voltage presets with 8 machine memory and name modes
- Set jump start to easy click for hard starting machine
- Precision regulated set point voltage 1.3-17v dc
- Universal input 110-240V AC 50/60hz
- Non-volatile memory
- Machine real run time
- Session work run time
- Strong built in magnets under silicone allow for use on a variety of workstations

Polyethylene Sleeve Covers - White 100pcs

• Available in 30 gsm polypropylene for particles and hygiene barrier and 0.02mm polyethylene for wet applications
• 400mm length for excellent protection from wrist to elbow
• Comfortable with elastic ends for secure fit
• HACCP certified

Trident Threadless Prong 3 Stone 2mm, 2.5mm, 2mm Attachment

Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

Trident Titanium Internally Threaded 10 Petal Jewelled Flower 16GA

Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Trident Titanium Internal Threaded Floating Navel

Internally Threaded Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Trident Titanium Threadless Nose Labret 1.0mm x 8mm x 2.5mm Disk

Threadless Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

Trident Threadless Plain Butterfly Attachment

Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

Bespoke Ear Stack 4 - Tear Drop | Marq | Blue Dangle Flower